Attwood Toggle Switch Manuel d'utilisateur télécharger pdf

Toggle Switch

7589

Installation Instructions

Attwood marine hardware, navigational lighting, bilge pumps, and other

marine accessories are specified more than any other brand by America’s

best-known boat manufacturers as original equipment. Look to Attwood

for quality replacement parts and marine accessories.

SAVE THESE INSTRUCTIONS

Form Number 69306 Rev. B 03-10

Figure 1

•

Knurled Nut

•

Chrome Nut

•

Panel: ¹⁄₈" (3mm) Max.

•

⁷⁄₁₆" (11mm)

Diameter

•

Spade

Ter minal

MOUNTING INSTRUCTIONS

1. Insert power source wire and switched wire into provided spade

terminals. Crimp terminals with tool. Attach spade terminals to

switch terminals.

2. Remove knurled nut from switch shaft.

3. In desired location, drill ⁷⁄₁₆" (11mm) diameter hole through dash

panel. From inside panel, insert shaft through hole.

4. Tighten knurled nut onto end of shaft. From inside, tighten

chrome nut against panel. Do not overtighten.

Note: All loads must be properly fuse protected.

1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com

REQUIRED FOR INSTALLATION

• Drill with ⁷⁄₁₆" (11mm) dia. bit.

• Slotted screwdriver.

• Terminal crimpers.

APPLICATION

• Install switch in dashboards or panels up to ¹⁄₈" (3mm) thick.

• Switch requires 1⁵⁄₈" (41mm) depth behind panel.

• Rated load is 5 amps.

Toggle Switch 1

Résumé du contenu

Page 1 - Toggle Switch

3®Toggle Switch7589Installation InstructionsAttwood marine hardware, navigational lighting, bilge pumps, and othermarine accessories are specified mor

Commentaires sur ces manuels

Pas de commentaire

Attwood Toggle Switch Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Attwood Toggle Switch. Attwood Toggle Switch User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Attwood Toggle Switch